Amazon amazon.com.au
Size search: 1790 mm bandsaw blade
Replacement blade lengthDocumented dimensions
1790 mm
Full blade loop length · 70.47 in
Blade width 3.2 mm – 10 mm
5 other machines take this exact blade ↗︎Specification
- As written by the manufacturer
- Blade Length 1790 mm; Blade Width 3.2 mm (min) - 10 mm (max)
- Blade loop length
- 1790 mm · 70.4724 in
- Blade width range
- 3.2 mm – 10 mm
- Thickness constraint
- Unknown — not documented here
- Motor / supply
- 375 W (1/2 HP) induction, 10 A plug
- Wheel diameter
- 255 mm
- Cut depth
- 125 mm
- Documented for
- Australia
- Source checked
- 1 Oct 2026
Australian source (Carbatec, the brand owner), standard machine only. The BS-245H manual (p.14) gives the same figures: blade length 1790 mm, minimum blade width 3.2 mm (1/8"), maximum 10 mm. The page address mentions an old code BAS-250B with a 1785 mm blade; that older model is not covered by this record. Blade thickness and TPI are not machine limits. Check your model label before ordering.
Find a replacement blade
Search by the documented size, then check the product details against this page before ordering.
Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.
Fitted this size? Tell others how it went
Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.
We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.
Same blade, other machines
The 1790 mm blade is documented for 5 other machines.
More from Carbatec
All Carbatec machines ↗︎
Photo: Carbatec
CarbatecSanding belt
BDS-1523H
AU · standard configuration
Documented dimensionsSanding Belt Size 1220 x 150 mm (LxW)View size →
Photo: Carbatec
CarbatecSanding belt
BDS-1530P
AU · standard configuration
Documented dimensionsSanding Belt Size 1220 x 150 mm (LxW)View size →
Photo: Carbatec
CarbatecBandsaw blade
BS-345H
AU · standard configuration
Documented dimensionsBlade Length 2490 mm; Blade Width 3.2 mm (min) - 19 mm (max)View size →
Similar machines from other brands
Understanding dimensions ↗︎
Photo: Sherwood
SherwoodBandsaw blade
SBSMH-350
AU · standard configuration
Documented dimensionsBlade Length 2920mm; Blade Widths 3-19mmView size →
Photo: Woodfast
WoodfastBandsaw blade
BS350D
AU · standard configuration
Documented dimensionsBlade Width 6-19mm; Blade Length 2820mmView size →
Photo: Woodfast
WoodfastBandsaw blade
BS350C
AU · standard configuration
Documented dimensionsBlade Width 6-19mm; Blade Length 2820mmView size →