Illustration: Floor-standing bandsaw
Axminster WorkshopBandsaw blade
AW1950B
UK · standard configuration
Documented dimensionsBlade Length 1,950mm; Blade Width Min/Max 6 mm to 13 mmView size →
Hammer N4400 bandsaw blade size
Floor-standing bandsaw
Replacement blade lengthDocumented dimensions
3976 mm
Full blade loop length · 156.54 in
Blade width 6 mm – 25 mm
Specification
- As written by the manufacturer
- Blade length in mm 3976; Blade width in mm 6–25
- Blade loop length
- 3976 mm · 156.5354 in
- Blade width range
- 6 mm – 25 mm
- Thickness constraint
- Unknown — not documented here
- Motor
- 3.5 HP (2.5 kW) S6/40%
- Flywheel diameter
- 440 mm
- Cutting height
- 310 mm
- Documented for
- Australia
- Source checked
- 1 Oct 2026
Australian source (Felder Group Australia), standard machine only. The same page lists optional Hammer blades for the N4400 as L= 3980 mm, 4 mm longer than the machine figure. Blade thickness is not stated as a machine limit and TPI is not a machine limit. Check your model label before ordering.
Find a replacement blade
Search by the documented size, then check the product details against this page before ordering.
No retailer mapping for this configuration in your selected country yet. Use the documented size with a local supplier.
Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.
Fitted this size? Tell others how it went
Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.
We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.
Similar machines from other brands
Understanding dimensions ↗︎
Photo: Charnwood
CharnwoodBandsaw blade
B350
UK · standard configuration
Documented dimensionsBlade length 2560 mm; Blade widths 6 - 25 mm (1/4" - 1") (manual); product page 3-25mm with optional scroll guideView size →
Illustration: Floor-standing bandsaw
ClarkeBandsaw blade
CBS250B
UK · standard configuration
Documented dimensionsBlade Length 1,712 mm; Blade Width 10 mmView size →