Photo: JET
JETBandsaw blade
JWBS-14SFX
US · standard configuration
Documented dimensionsBlade length (blade not provided) 116 in. (2947 mm); Minimum blade width 1/8 in. (3.175 mm); Maximum blade width 3/4 in. (19 mm)View size →
Replacement blade lengthDocumented dimensions
67.5 in
Full blade loop length · 1714.5 mm
Blade width 0.125 in – 0.5 in
3 other machines take this exact blade ↗︎Specification
- As written by the manufacturer
- BLADE SIZE 67-1/2" x (1/8" - 1/2") x 0.025"
- Blade loop length
- 1714.5 mm · 67.5 in
- Blade width range
- 0.125 in – 0.5 in
- Thickness constraint
- Unknown — not documented here
- Motor / supply
- 1/2 HP, 3.4 A; 120 V, 1 phase, 60 Hz
- Throat
- 9-1/2 in
- Cutting height
- 4-1/8 in
- Documented for
- Canada
- Source checked
- 1 Oct 2026
Canadian source, standard machine only. Blade length and the blade width range are taken from King Canada's blade size line; the instruction manual gives the same blade size. The 0.025 in figure in that line is the blade gauge, not a stated maximum thickness, so no thickness limit is recorded. TPI is not a machine limit. Check your model label before ordering.
Find a replacement blade
Search by the documented size, then check the product details against this page before ordering.
No retailer mapping for this configuration in your selected country yet. Use the documented size with a local supplier.
Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.
Workshop reports
Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.
No reports yet for this configuration.
We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.
Fitted this size? Tell others how it went
Same blade, other machines
The 67-1/2 in blade is documented for 3 other machines.
Similar machines from other brands
Understanding dimensions ↗︎
Illustration: Floor-standing bandsaw
FelderBandsaw blade
FB 610
US · standard configuration
Documented dimensionsBlade length in inches 179; Blade width in inches ¼–1⅛View size →
Photo: Powermatic
PowermaticBandsaw blade
PM2013B-3
US · standard configuration
Documented dimensionsBlade length 170 +/-1/2" (4318mm); Minimum blade width 1/4" (6.35mm); Maximum blade width 1-1/2" (38mm)View size →