Photo: Powermatic
PowermaticBandsaw blade
PM2415B
US · standard configuration
Documented dimensionsBlade length 183 +/-1/2" (4648mm); Minimum blade width 1/4" (6.35mm); Maximum blade width 1-1/2" (38mm)View size →
Replacement blade lengthDocumented dimensions
93.5 in
Full blade loop length · 2374.9 mm
Blade width 0.125 in – 0.75 in
10 other machines take this exact blade ↗︎Specification
- As written by the manufacturer
- This saw uses a standard 93-1/2" blade, although it will take a maximum of 94" and a minimum of 91-1/2". Blade widths from 1/8" to 3/4" may also be used.
- Blade loop length
- 2374.9 mm · 93.5 in
- Blade width range
- 0.125 in – 0.75 in
- Thickness constraint
- Unknown — not documented here
- Motor / supply
- 3/4 HP; 110 V
- Documented for
- Canada
- Source checked
- 1 Oct 2026
Canadian source, standard machine only (no riser block). Older model with no current product page; figures are from King Canada's own instruction manual. The stored length is the standard 93-1/2 in blade; the manual says the saw accepts 91-1/2 in to 94 in. Blade thickness is not stated. TPI is not a machine limit. Check your model label before ordering.
Find a replacement blade
Search by the documented size, then check the product details against this page before ordering.
No retailer mapping for this configuration in your selected country yet. Use the documented size with a local supplier.
Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.
Workshop reports
Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.
No reports yet for this configuration.
We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.
Fitted this size? Tell others how it went
Same blade, other machines
The 93-1/2 in blade is documented for 10 other machines.
- Grizzly G0555Bandsaw blade · US
- Grizzly G0555LXBandsaw blade · US
JET J-8201KFloor-standing bandsaw · US
JET J-8203KFloor-standing bandsaw · US
JET JWBS-14CSFloor-standing bandsaw · US- King Canada KC-1401FXFloor-standing bandsaw · CA
- PORTER-CABLE PCB330BSFloor-standing bandsaw · US
Powermatic PWBS-14CSFloor-standing bandsaw · US- Shop Fox W1706Floor-standing bandsaw · US
WEN BA1411Floor-standing bandsaw · US
Similar machines from other brands
Understanding dimensions ↗︎
Photo: Laguna Tools
Laguna ToolsBandsaw blade
14|CX
US · standard configuration
Documented dimensionsBlade Length: 115″; Min Blade Width: ⅛″; Max Blade Width: ¾″View size →
Photo: JET
JETBandsaw blade
JWBS-15-3
US · standard configuration
Documented dimensionsBlade length 133 in. (min. 131.8; max. 133.5); Minimum blade width 1/8 in.; Maximum blade width 1 in.View size →