Photo: RIKON
RIKONBandsaw blade
10-385
US · standard configuration
Documented dimensions176 in loop; 0.375–1.375 in widthView size →
Replacement blade lengthDocumented dimensions
131.625 in
Full blade loop length · 3343.28 mm
Blade width 0.125 in – 1 in
Specification
- As written by the manufacturer
- BLADE SIZE 131-5/8" x (1/8" - 1") x 0.025"
- Blade loop length
- 3343.275 mm · 131.625 in
- Blade width range
- 0.125 in – 1 in
- Thickness constraint
- Unknown — not documented here
- Motor / supply
- 14 A / 7 A; 110 V / 220 V, 1 phase, 60 Hz (prewired 110 V)
- Throat
- 16-1/4 in
- Cutting height
- 12 in
- Documented for
- Canada
- Source checked
- 1 Oct 2026
Canadian source, standard machine only. Blade length and the blade width range are taken from King Canada's blade size line; the manual's optional blade table lists the same 131-5/8 in length. The 0.025 in figure in that line is the blade gauge, not a stated maximum thickness, so no thickness limit is recorded. TPI is not a machine limit. Check your model label before ordering.
Find a replacement blade
Search by the documented size, then check the product details against this page before ordering.
No retailer mapping for this configuration in your selected country yet. Use the documented size with a local supplier.
Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.
Workshop reports
Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.
No reports yet for this configuration.
We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.
Fitted this size? Tell others how it went
Similar machines from other brands
Understanding dimensions ↗︎
Photo: Laguna Tools
Laguna ToolsBandsaw blade
LT16
US · standard configuration
Documented dimensionsBlade Length: 150″; Minimum Blade Width: *⅛″ (* With optional Cool Blocks) or ¼″ standard; Maximum Blade Width: 1-⅜″View size →
Illustration: Floor-standing bandsaw
OliverBandsaw blade
4630
US · standard configuration
Documented dimensionsBlade Size – 1/4” – 1 1/4” 133” long.View size →