Photo: Grizzly
GrizzlyBandsaw blade
G0926
US · standard configuration
Documented dimensionsStd. Blade Length 64-1/2 in.; Blade Length Range 63-3/4 - 64-5/8 in.View size →
Replacement blade lengthDocumented dimensions
121.75 in
Full blade loop length · 3092.45 mm
Blade width 1 in – 1 in
1 other machine takes this exact blade ↗︎Specification
- As written by the manufacturer
- BLADE 121-3/4" x 1" x 0.035"
- Blade loop length
- 3092.45 mm · 121.75 in
- Blade width range
- 1 in – 1 in
- Thickness constraint
- Unknown — not documented here
- Motor / supply
- 2 HP, 11.5 Amp.; 230V, 1 phase, 60 Hz
- Blade speed
- 73-312 FPM (variable)
- Cutting capacity at 90°
- Rect. 10" x 18"; Diam. 10"
- Documented for
- Canada
- Source checked
- 1 Oct 2026
Canadian source, standard machine only. Blade length and width are as stated; TPI and blade material are not established by these dimensions. The linked instruction manual gives the same 121-3/4" x 1" blade, but the replacement blades listed on the page are 122" x .032" x 1" (about 6 mm longer); measure your current blade if in doubt. Blade thickness is not recorded because the page and manual (0.035") differ from those replacement blades (0.032"). Check your model label before ordering.
Find a replacement blade
Search by the documented size, then check the product details against this page before ordering.
No retailer mapping for this configuration in your selected country yet. Use the documented size with a local supplier.
Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.
Workshop reports
Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.
No reports yet for this configuration.
We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.
Fitted this size? Tell others how it went
Same blade, other machines
The 121-3/4 in blade is documented for 1 other machine.
Similar machines from other brands
Understanding dimensions ↗︎
Photo: Baileigh
BaileighBandsaw blade
BS-712MS
US · standard configuration
Documented dimensions.75” x .035” x 92.91” (19 x .09 x 2360mm)View size →
Photo: JET
JETBandsaw blade
HBS-56MVS
US · standard configuration
Documented dimensionsBlade size (WxTxL): 1/2 x 0.025 x 64-1/2 in. (13 x 0.64 x 1638 mm)View size →