The right fit. Ready for the next job.Independent workshop reference
Your country
United States
DeutschlandDeutsch

Suggested from your IP address; change it anytime. Country coverage ↗︎

Sherwood

Sherwood SOB-6-X-90 sanding belt size

Edge sander

Photo: Sherwood · Source ↗︎
Sherwood SOB-6-X-90

Click the photo to zoom in and move the pointer to look around. Esc closes.
Replacement belt sizeDocumented dimensions

150 mm × 2260 mm

Width × full loop length · 5.91 × 88.98 in

Find a replacement belt ↓
4 other machines take this exact belt ↗︎

Specification

As written by the manufacturer
Sanding belt size: 150mm (6in) x 2260mm (90in)
Belt width
150 mm · 5.9055 in
Belt loop length
2260 mm · 88.9764 in
Motor / supply
Single Phase 2200W 3HP 10A, 2800 RPM
Table
750 W x 250mm D
SKU
SOB-6-X-90
Documented for
Australia
Source checked
1 Oct 2026

Australian source: Timbecon, which sells the Sherwood machinery brand under its own five-year warranty. Standard machine only. The page's inch figure (90in) is nominal; the stated millimetre values (150 x 2260mm) are stored. Check your model label before ordering. Abrasive grit, backing and joint type are not established by these dimensions.

Find a replacement belt

Search by the documented size, then check the product details against this page before ordering.

United States · Change country

No retailer mapping for this configuration in your selected country yet. Use the documented size with a local supplier.

Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.

Workshop reports

Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.

No reports yet for this configuration.

We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.

Fitted this size? Tell others how it went
How did it fit?

Your name, note and product are shown publicly after review. Privacy

Same belt, other machines

The 150 × 2260 mm belt is documented for 4 other machines.

All 150 × 2260 mm machines ↗︎

Similar machines from other brands

Understanding dimensions ↗︎