Amazon amazon.com.au
Size search: 150 x 2515 mm sanding belt
Replacement belt sizeDocumented dimensions
150 mm × 2515 mm
Width × full loop length · 5.91 × 99.02 in
Specification
- As written by the manufacturer
- Sanding Belt Size: 150mm x 2515mm; title: 2515mm (100") x 150mm (6")
- Belt width
- 150 mm · 5.9055 in
- Belt loop length
- 2515 mm · 99.0157 in
- Motor / supply
- 3HP (2.2kW) output; 240V 50Hz Single Phase
- Table
- 855 x 300mm
- SKU
- 8043153
- Documented for
- Australia
- Source checked
- 1 Oct 2026
Australian source (Woodfast, which designs and sells its own machines), standard machine only. The page's inch figure (100") is nominal; the stated millimetre values (150mm x 2515mm) are stored. Check your model label before ordering. Abrasive grit, backing and joint type are not established by these dimensions.
Find a replacement belt
Search by the documented size, then check the product details against this page before ordering.
Retailer searches do not establish a product fit. Coverage is country-specific; shipping is not guaranteed. Affiliate disclosure: we may earn a commission from eligible links, at no cost to you. As an Amazon Associate I earn from qualifying purchases. A link does not indicate current stock or a price promise.
Fitted this size? Tell others how it went
Reports from visitors, not verified by BenchRefill. The size above comes from the manufacturer source.
We read every report before it appears. We remove spam and personal details but publish negative reports too. We cannot confirm that the writer owns this machine.
More from Woodfast
All Woodfast machines ↗︎
Photo: Woodfast
WoodfastBandsaw blade
BS250B
AU · standard configuration
Documented dimensionsBlade Width 6-13mm; Blade Length 1790mmView size →
Photo: Woodfast
WoodfastBandsaw blade
BS350C
AU · standard configuration
Documented dimensionsBlade Width 6-19mm; Blade Length 2820mmView size →
Photo: Woodfast
WoodfastBandsaw blade
BS350D
AU · standard configuration
Documented dimensionsBlade Width 6-19mm; Blade Length 2820mmView size →
Similar machines from other brands
Understanding dimensions ↗︎
Photo: Sherwood
SherwoodSanding belt
SOB-6-X-90
AU · standard configuration
Documented dimensionsSanding belt size: 150mm (6in) x 2260mm (90in)View size →
Photo: Carbatec
CarbatecSanding belt
WBS-2200C
AU · standard configuration
Documented dimensionsSanding Belt Size 2260 x 150 mm (LxW)View size →
Photo: HAFCO
HAFCOSanding belt
L-80
AU · standard configuration
Documented dimensions(mm) Belt Size 150 x 2260View size →